\documentclass{eusflat2005}

\title{\bf Instructions for Authors}
\author{{\bf Author}\\
Address\\ e-mail \And  {\bf Author}\\ Address\\ e-mail \And {\bf
Author}\\ Address\\ e-mail}

\begin{document}

\maketitle

\begin{abstract}
The abstract paragraph must be indented 0.7 cm on both
left and right-hand margins.

{\bf Keywords:} Paper, Instructions.
\end{abstract}

\section{General formatting instructions}

Papers are limited to a maximum of 6 pages. The pages must have an overall width of
17.2 cm, with two columns of 8.25 cm wide each, and 0.7 cm of
space between columns. The left margin must have 2.5 cm and the right
margin 1.3 cm (considering A4 paper, 21 $\times$ 29.7 cm). The upper
margin of all the pages must be of 2.5 cm and the length of the text is 23.7
cm (generating a lower margin of 3.5 cm in A4 paper).

The pages must not be numbered. Paper title is centered. Authors' names
are centered too. The normal text of the paper must be in 11pt.
The LaTeX style file (eusflat2005.cls),
the example file generating this page (eusflat2005.tex),
and the MS-WORD example (eusflat2005.doc)
can be found in the Conference web page
(\texttt{http://cubisme.upc.es/eusflat2005}).

\section{Footnotes and Citations}

Footnotes must be numbered\footnote{Example of footnote.}, and placed at the bottom of the column where they
appear.

Citations must include the reference number between
brackets, for example \cite{bibli1}. References must be sorted by the author name.

\section{Helpful Hints}

\subsection{Figures and Tables}

Avoid placing figures and tables before their first mention in the text.
Use the abbreviation "Fig. 1" even at the beginning of a sentence

All figures must be centered like Figure \ref{figure1}. The number
and caption of the figure must always appear below the figure.
\begin{figure}[h]
  \centering\epsfig{file=fig1.ps,width=\linewidth}
  \caption{Example of figure title}
  \label{figure1}
\end{figure}

Figure axis labels are often a source of confusion.
Try to use words rather than symbols. Put units in parentheses.
Do not label axes only with units.
Do not label axes with a ratio of quantities and units.
For example, write "Temperature (K)," not "Temperature/K."
Figure labels should be legible, about 10-point type.

%\subsection{Tables}

All tables must be centered and clear. The number and title always
appear above the table (See Table \ref{table}).
\begin{table}[ht]
\begin{center}
\caption{Example of title of a table.}\label{ttabl}
\label{table}
\begin{tabular}{|c|l|} \hline
    {\bf NAME} & {\bf DESCRIPTION} \\ \hline $A$ &   Fuzzy subset of $X$
\\ $\mu_{A}$ & Membership function of $A$ \\ \hline
\end{tabular}
\end{center}
\end{table}

\subsection{References}
Number citations consecutively in square brackets \cite{bibli1}.
The sentence punctuation follows the bracket \cite{bibli2}.
Refer simply to the reference number, as in \cite{bibli3}.
Do not use "Ref. \cite{bibli3}" or reference \cite{bibli3}" except at the beginning of a sentence:  "Reference
 \cite{bibli3} was the first …" Give all authors' names; do not use "et al."  unless there are
 six authors or more.  Papers that have not been published, even if they have been
 submitted for publication, should be cited as "unpublished" \cite{bibli4}.  Papers that have been
 accepted for publication should be cited as "in press" \cite{bibli5}.
 Capitalize only the first word in a paper title, except for proper nouns and element
 symbols.

\subsection{Abbreviations and Acronyms}
Define abbreviations and acronyms the first time they are used in the text, even after
they have been defined in the abstract. Abbreviations such as EUSFLAT and LFA do not
have to be defined. Do not use abbreviations in the title unless they are unavoidable.

\subsection{Equations}
Number equations consecutively with equation numbers in parentheses flush with the
right margin, as in (1). To make your equations more compact, you may use the
solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols
for quantities and variables, but not Greek symbols. Use a long dash rather than a
hyphen for a minus sign. Use parentheses to avoid ambiguities in denominators.
Punctuate equations with commas or periods when they are part of a sentence, as in

$$\displaystyle (a/b)+x=c\,. \eqno (1) $$

Be sure that the symbols in your equation have been defined before the equation appears
or immediately following. Use "(1)," not "Eq. (1)" or "equation (1)," except at the
beginning of a sentence:  "Equation (1) is …"

\section{Units}
Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units
may be used as secondary units (in parentheses). An exception would be the use of
English units as identifiers in trade, such as "3.5-inch disk drive."
Avoid combining SI and CGS units, such as current in amperes and magnetic field in
oersteds. This often leads to confusion because equations do not balance dimensionally.
If you must use mixed units, clearly state the units for each quantity that you use in
an equation.

\begin{ack}
The word acknowledgements must be aligned to the left, not
numbered and bolded.
\end{ack}

\begin{thebibliography}{99}
\bibitem{bibli1} G. Eason, B. Noble, and I.N. Sneddon, "On certain integrals of Lipschitz-Hankel type involving products of Bessel functions," Phil. Trans. Roy. Soc. London, vol. A247, pp. 529-551, April 1955.
\bibitem{bibli2} J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68-73.
\bibitem{bibli3} I.S. Jacobs and C.P. Bean, "Fine particles, thin films and exchange anisotropy," in Magnetism, vol. III, G.T. Rado and H. Suhl, Eds. New York:  Academic, 1963, pp. 271-350.
\bibitem{bibli4} K. Elissa, "Title of paper if known," unpublished.
\bibitem{bibli5} R. Nicole, Title of paper with only first word capitalized," J. Name Stand. Abbrev., in press.
\end{thebibliography}

\end{document}